The issuer is solely responsible for the content of this announcement.

About Infineon

Infineon Technologies AG is a global semiconductor leader in power systems and IoT. Infineon drives decarbonization and digitalization with its products and solutions. The company has around 56,200 employees worldwide and generated revenue of about €14.2 billion in the 2022 fiscal year (ending 30 September). Infineon is listed on the Frankfurt Stock Exchange (ticker symbol: IFX) and in the USA on the OTCQX International over-the-counter market (ticker symbol: IFNNY).

This press release is available online at www.infineon.com/press
Follow us: Twitter - Facebook - LinkedIn

About GaN Systems

GaN Systems is a global leader in GaN power semiconductors with a broad portfolio of transistors which address the needs of today's most demanding industries including consumer electronics, data center servers and power supplies, renewable energy systems, industrial motors, and automotive electronics.

This press release is available online at www.gansystems.com/press-releases Follow us: Twitter - Facebook - LinkedIn

化合物半導體在科技部是重大發展計畫之一，陽明交大承接碳化矽(SiC)、氮化鎵(GaN)等新材料應用於Power IC、RF，藉此開發與鏈結創新材料、設計、軟體及服務平台成果，培養全球市場即戰力。透過跨產業與學術交流平台及研討活動，能串聯廠商推動媒合，促成各團體跨界合作。

SEMI在化合物半導體領域的推動不遺餘力，更積極搭起上中下游交流平台，本次活動為2023年化合物半導體的產官學交流分享揭開序幕，邀請產學研夥伴洞悉市場趨勢及分享成功案例。

歡迎SEMI會員、化合物半導體及3DIC的廠商主管至報名網站參加。

本活動採實體進行，謝謝！

聚焦分享：

l   筑波科技：WBG 市場趨勢及測試方案系統實務介紹

l   GaN Systems：WBG Can Resolve Energy Problem

l   筑波科技：化合物半導體非破壞的 Wafer /材料分析應用方案

l   陽明交大/鴻海研究院：Recent Progress of WBG for EV

l   盛新材料：SiC Substrate in Taiwan

活動日期:　 2023年02月10日(五) PM12:30 – PM18:30

活動地點:　 新竹縣竹北市生醫二路66號 筑波醫電大樓 (新竹生醫園區)

報名方式:　 03-5500909 ext. 3407林小姐/ 3502 鄭小姐  service@acesolution.com.tw

線上報名:　 https://register.acesolution.com.tw/2023_WBG_Semiconductor_Seminar

Hsinchu, Taiwan, September 9, 2024 -SEMICON Taiwan officially opened on September 6, 2024, with ACE Solution and HON. PRECISION is joining forces to showcase its latest advancements in silicon photonics testing technology, precision measurement, and automated machinery integration. Their exhibition focused on high-density optoelectronic integration testing solutions designed to meet the increasing demands of silicon photonics for high-capacity and high-channel testing. The integrated optoelectronic signal testing system effectively addresses the challenges posed by increased data center traffic and high-speed transmission needs, significantly boosting transmission rates and reducing energy consumption. With semiconductor packaging evolving towards Co-Packaged Optics (CPO), ACE Solution highlighted its silicon photonics solutions developed through deep collaboration with Quantifi, integrating PXI testing modules to offer an efficient, multi-system testing solution supporting 800G and 1.6T high-speed transmission. These integrated solutions meet the research and production needs for high-speed, high-precision, and high-efficiency testing while offering programmable automation for flexible applications.

ACE Solution also demonstrated its latest innovations in compound semiconductor testing. The Teradyne ETS-88 testing platform is widely used for SiC, GaN, PMIC, automotive electronics, aerospace, and defense industries. Key features include multi-site CP, second-contact KGD, dynamic/static power device FT, and fully automated high-output module FT. The ETS-364 and ETS-800 platforms are tailored for mixed-signal, digital, and analog testing, offering the industry's highest-spec power IC testing capabilities with support for up to 6000V and 4000A, making them ideal for high-current, high-voltage applications, particularly in EV power and battery management.

The TZ-6000 non-destructive wafer and materials inspection system utilizes terahertz (THz) technology, focusing on compound semiconductor testing for GaAs, SiC, and GaN. It offers greater penetration depth and flexibility, handling various sizes and shapes of wafers. Equipped with advanced wafer probes and intelligent software analysis, it can simultaneously measure parameters such as thickness, refractive index, resistivity, dielectric constant, surface/subsurface defects, and full wafer scans, enabling non-destructive wafer quality measurements.

The Electro-Optic Terahertz Pulse Reflectometer (EOTPR) is the world's first instrument to use isolation technology to detect IC package faults and monitor package quality, making it ideal for non-destructive defect detection in 3DIC package analysis. With 5-micron pinpoint precision, the EOTPR is widely used in advanced IC packaging fault analysis for devices such as stacked packages (PoP), flip-chip, and TSV in 3D packaging. Major semiconductor companies have extensively deployed EOTPR for advanced IC packaging quality assurance in manufacturing environments.

Steve Hsu, President of ACE Solution, stated, "With over 20 years of experience in hardware-software integration, ACE Solution has expanded from wireless communication testing to various testing fields, meeting the needs of our local clients. We are thrilled to collaborate with HON. PRECISION to showcase our achievements in automation and precision testing." Alan Hsieh, President of HON. PRECISION commented, "This exhibition marks a new milestone in our partnership with ACE Solution.

We look forward to offering more advanced solutions, fostering greater collaboration and innovation across the industry."

For media inquiries, please contact:

ADVANCED COMM.ENGINEERING SOLUTION CO., LTD.

Peter Lee, Jenny Lin

Address: 2F-1, No.28, Taiyuan street, Jhubei City, Hsinchu County, 302, Taiwan

Telephone: +886 3 5500909 #3801, +886 3 5500909 #3407

E-mail: service@acesolution.com.tw

Website: https://www.acesolution.com.tw/en/

About ACE Solution

Established in 2000, ACE Solution (https://www.acesolution.com.tw/en/) is headquartered in Hsinchu City, Taiwan, with branch offices strategically located in Suzhou and Shenzhen, China. Our company is dedicated to delivering tailored test solutions that cater to the specific requirements of our customers in the field of electrical components, devices, and system manufacturing. Furthermore, we collaborate with our esteemed partners to provide comprehensive technology solutions. At ACE Solution, we specialize in RF, mmWave, and terahertz technologies, boasting an accomplished team of technical experts who offer unparalleled support. Our commitment to professionalism, innovation, and versatility enables us to offer cutting-edge integrated techniques and solutions. By leveraging our expertise, we empower our clients to overcome technological challenges and achieve their desired outcomes efficiently and effectively.

台灣新竹，2024年09月09日，SEMICON 國際半導體展盛大開幕，筑波科技 (ACE Solution) 與鴻勁精密 (Hon. Precision) 攜手參展，展示光電整合矽光子測試技術、精密量測及自動化機台的整合，著重高密度與光電結合測試方案，專為應對高容量與高通道的矽光電子測試需求，提供高度集成的光電信號一體化測試系統，有效應對高速傳輸和數據中心流量增加的挑戰，顯著提升傳輸速率並降低能耗。精密半導體封裝已邁向 CPO (Co-Packaged Optics) 發展，筑波科技此次展示的矽光子解決方案來自與 Quantifi 的深度合作，整合 PXI 測試模組提供高效整合的多機一體測試方案，支援 800G 和 1.6T 的高速傳輸。在光通訊與高速訊號介面傳輸的整合中，滿足研發與生產部門對高速率、高精度、高效率的測試需求，也具備靈活的可程式自動化規劃功能。

筑波科技還展示其在化合物半導體測試最新成果。Teradyne ETS-88 測試方案廣泛應用於 SiC、GaN、PMIC、車用電子、航空航天和國防工業等。該方案具備多工位 CP、二次接觸 KGD、動/靜一體功率器件 FT 和全自動高產出模組 FT 四大特色。ETS-364 和 ETS-800 則專門用於混合信號、數位和類比測試，提供業界最高規格功率 IC 測試平台可支持達 6000V 和 4000A 測試，能應對高電流、高電壓需求，尤其在電動車電源和電池管理等應用中具有優越性能。

TZ-6000 非破壞性晶圓和材料檢測系統利用太赫茲 (Terahertz, THz) 技術，專注於砷化鎵、碳化矽和氮化鎵等化合物半導體測試，提供更高穿透深度。具備高度靈活性，適用各種尺寸和形狀的晶圓，並配備獨有多元晶圓探頭及智能軟體分析功能，能同時測量多個參數，如厚度、折射率、電阻率、介電常數、表面/次表面缺陷及整個晶圓掃描，實現非破壞性晶圓品質測量。

電光太赫茲脈衝反射儀 (EOTPR) 是全球首款使用隔離技術檢測積體電路封裝故障和監測封裝品質的設備，特別適用於 3DIC 積體電路封裝的非破壞性缺陷檢測。該儀器提供 5 微米的定位精度，適合用於手機和電腦應用中複雜且先進積體電路芯片的故障分析，包括堆疊式封裝層迭 (PoP)、覆晶 (Flip-Chip) 和 3D 封裝中的矽通孔 (TSV) 等封裝形式。EOTPR 已在各大半導體公司的先進 IC 封裝故障分析領域得到廣泛應用，在品質保證與檢驗的製造環境大量部署。

筑波科技董事長許深福表示：「筑波科技擁有 20 年的軟硬體整合經驗，從無線通訊測試基礎延伸至各個測試領域，致力於滿足本地客戶的需求。我們非常高興能與鴻勁精密合作，共同展示我們的機構自動化與精密測試的協同技術成果。」鴻勁精密董事長謝旼達表示：「此次展會標誌著鴻勁與筑波科技合作的新里程碑。我們期待未來能夠提供更多先進解決方案，促進行業間的交流與合作。」未來筑波科技將與鴻勁精密持續攜手推動創新，為客戶提供卓越方案。

請追蹤筑波集團LinkedIn，掌握最新消息！

聯絡筑波科技

筑波科技股份有限公司ACE Solution, Co., Ltd.

地址：新竹縣竹北市台元街28號2樓之1

電話：03-5500909

電子郵件：service@acesolution.com.tw

網站：https://www.acesolution.com.tw/en/index/

關於筑波科技（ACE Solution）

筑波科技（https://www.acesolution.com.tw/en/index/）成立於2000年，位於台灣新竹，在中國蘇州和深圳以及越南設有分公司，可提供服務。我們的使命是提供訂製的測試解決方案，以滿足電氣元件、設備和系統製造商的客戶需求，通過合作夥伴提供技術解決方案。我們專注於射頻、毫米波和太赫茲領域，擁有專業的技術支援團隊，提供專業、創新和多功能的綜合技術和解決方案。

Advancing R&D, talent development and the region’s energy transition

• Up to 30% overall energy savings compared to conventional AC systems
• A reduction of up to 400 tonnes of CO₂ equivalent (CO₂e) per megawatt per year
• 45% lower copper consumption and a 30–40% smaller power-infrastructure footprint
• The ability to support ultra-high-density racks exceeding 1,000kW, with higher reliability and lower cost
• Native compatibility with renewable power sources able to feed directly to the direct-current system, avoiding inefficient power conversions

• Building a talent pipeline: STT GDC will provide internship placements across ITE, SP, NTU and NUS over the next five years, with support from Enterprise Singapore. The programme offers immersive, hands-on experience in data centre operations and corporate functions such as IT, sustainability, finance and marketing, supported by mentoring from industry professionals. In addition, STT GDC will offer 100 sponsorships for Data Centre Foundation Certificate (DCFC®) offered by EPI, a global certification body for data centre facilities, data centre operations and industry professionals, accelerating entry into the sector.
• Developing industry-ready talent with ITE: The collaboration with ITE will benefit approximately 800 students annually — totalling 2,400 students over three years — from ITE's engineering and information and communications technology (ICT)-related Higher Nitec and Work-Study Diploma courses. Key initiatives include co-developing industry-relevant curricula for full-time and Continuing Education & Training (CET) courses in data centre operations and sustainability; deploying a data centre virtual reality system at the ITE Extended Reality Centre for immersive training; supporting lecturer attachments and student internships; and enabling students to pursue the sponsored DCFC® course.
• Sustainability leadership with SP: The partnership with SP develops expertise in environmental sustainability and green data centre solutions. Initiatives include joint exploration of green technologies and practices; industry seminars and events to promote sustainable solutions; and targeted programmes for training, mentorship, applied projects and internships.
• Innovation and research leadership with NTU: The partnership with NTU combines cutting-edge joint R&D of solutions for AI data centres powered by direct current sources; training, curriculum and talent development for the AI data centre sector; industry and career talks; and internship opportunities across STT GDC's group of companies.
• Graduate pathways with NUS: STT GDC's collaboration with NUS supports accessible entry points for graduates through internships, training opportunities and ongoing career and industry engagement to raise awareness of digital infrastructure pathways.

https://www.sttelemediagdc.com/

The issuer is solely responsible for the content of this announcement.

About ST Telemedia Global Data Centres

ST Telemedia Global Data Centres (STT GDC) is one of the fastest-growing data centre providers with a global platform serving as a cornerstone of the digital ecosystem that helps the world to connect. Powering a sustainable digital future, STT GDC operates across Singapore, the UK, Germany, Italy, India, Thailand, South Korea, Indonesia, Japan, the Philippines, Malaysia and Vietnam, providing businesses an exceptional foundation that is built for their growth anywhere. For more information, visit https://www.sttelemediagdc.com/



Appendix: Partner Quotes

Mr Peter Lam, Chief Executive Officer, Institute of Technical Education (ITE): "At ITE, our focus is on equipping our students with future-ready skills for Singapore's evolving economy. Through the partnership with STT GDC, our students gain valuable real-world training and exposure to advanced tools in data centre operations. This strengthens our efforts to prepare career-ready students and develop talent for Singapore's growing digital infrastructure sector."

Mr Soh Wai Wah, Principal and CEO of SP: "Singapore Polytechnic is committed to developing a future-ready workforce that can support Singapore's growing demand for sustainable and resilient data centre operations. This partnership with STT GDC brings together our strengths in training, applied learning and industry collaboration to nurture talent in environmental sustainability and green solutions for data centres. Through co-developed programmes, mentorship, student projects and internships, we will build deeper capabilities and broaden pathways for learners to contribute to this important sector. SP looks forward to advancing this effort with STT GDC to support Singapore's long-term industry and sustainability goals."

Professor Lam Khin Yong, Vice President (Industry), Nanyang Technological University: "STT GDC is a partner that shares our commitment to advancing impactful research and developing future-ready talent. Leveraging NTU's strengths in artificial intelligence, energy-efficient systems and translational innovation, this partnership will accelerate the co-development of next-generation AI data centre technologies while providing our students and researchers with valuable real-world experience. Together, we are helping to build a robust pipeline of skilled professionals who will support Singapore's ambitions in sustainable and AI-driven digital infrastructure."

Ms Joan Tay, Senior Director, NUS Centre for Future-ready Graduates: "NUS' partnership with STT GDC is timely, as demand grows for skilled professionals to manage complex, high-density AI infrastructure. Through internships, training, industry engagement and access to recognised certification, we bridge education and industry to equip students with the skills and experience needed to thrive in today's fast-evolving digital infrastructure space."

James Tang, Executive Vice President of Mobility at Delta and Head of its Electric Vehicle Solutions Business Group, stated, "Delta has been developing high-efficiency automotive power products, systems and solutions since 2008 to help reduce transportation-related carbon emissions. Through the establishment of this joint innovation laboratory with TI, Delta intends to leverage TI's abundant experience and advanced technology in digital control and GaN to enhance the power density and performance of our EV power systems. With more leading-edge product development and design capabilities, we aim to achieve closer technology exchange and collaboration to accelerate product development and improve product safety and quality. We look forward to furthering our technology leadership and creating a win-win situation in the rapid developing electric vehicle market."

"The transition to electric vehicles is key to helping achieve a more sustainable future, and through years of collaboration with Delta Electronics, we have a solid foundation to build upon," said Amichai Ron, senior vice president for Embedded Processing at TI. "Together with Delta, we will use TI semiconductors to develop EV power systems like onboard chargers and DC/DC converters that are smaller, more efficient and more reliable, increasing vehicle driving range and encouraging more widespread adoption of electric vehicles."

In response to the era of software-defined vehicles (SDV), Delta has built up joint labs with several international semiconductor companies that focus on automotive power electronics and digital control, to meet the future innovation and higher requirements for power efficiency and safety in next generation EVs. The joint innovation lab with TI is expected to accelerate development and full validation of Delta's automotive products to help international car manufacturers develop key architectures and layouts for next-generation EVs with better product quality than the competitors.

About Delta

Delta, founded in 1971, is a global leader in switching power supplies and thermal management products with a thriving portfolio of smart energy-saving systems and solutions in the fields of industrial automation, building automation, telecom power, data center infrastructure, EV charging, renewable energy, energy storage and display, to nurture the development of smart manufacturing and sustainable cities. As a world-class corporate citizen guided by its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," Delta leverages its core competence in high-efficiency power electronics and its ESG-embedded business model to address key environmental issues, such as climate change. Delta serves customers through its sales offices, R&D centers and manufacturing facilities spread over close to 200 locations across 5 continents.

Throughout its history, Delta has received various global awards and recognition for its business achievements, innovative technologies and dedication to ESG. Since 2011, Delta has been listed on the DJSI World Index of Dow Jones Sustainability™ Indices for 13 consecutive years. Delta has also won CDP with double A List for 3 times for its substantial contribution to climate change and water security issues and has been named Supplier Engagement Leader for its continuous development of a sustainable value chain for 7 consecutive years.

For detailed information about Delta, please visit: www.deltaww.com

NESS ZIONA, Israel, Nov. 14, 2023 /PRNewswire/ -- VisIC Technologies Ltd, a global leader in advanced GaN power electronics solutions, is excited to introduce the highly anticipated V22TG D³GAN power package. This revolutionary power package, housed in an advanced gull wing leaded top side cooled isolated package, sets new standards for performance, reliability, and versatility in the automotive industry.

VisIC's V22TG D3GAN Advanced Top-Side Cooled Isolated Package

Designed with the future of electric vehicles in mind, the V22TG D³GAN brings together an array of cutting-edge features to deliver exceptional power density and efficiency. This compact power package with a small footprint of 19.7x13.6mm (including leads), provides automotive manufacturers with flexibility in system design and integration. Targeted for automotive AEC-Q101 standard, it can be used as well in the highly reliable field of server power supplies, data centers, solar inverters, and a wide range of industrial applications.

Key Features and Benefits:

1. Advanced Leaded Top-Side Cooled Isolated Package: The V22TG D³GAN is encased in an innovative leaded top-side cooled isolated package. This design promotes excellent thermal management, ensuring optimal performance and reliability in demanding automotive environments. Moreover, the isolated package enhanced the ease of assembly due to no additional isolation needed.

2. Automotive and High Voltage Capability: The V22TG D³GAN is rigorously tested targeting to meet automotive industry standards, making it suitable for a wide range of automotive applications, like OBC, Fuel Cell, and hybrid electric vehicles. With a voltage capability of 650V, this SMD power package can handle high-voltage requirements with effortless efficiency.

3. High Power Density and Low On-Resistance: Offering a low on-resistance of 22mΩ, the V22TG D³GAN delivers outstanding power density, empowering automotive manufacturers to create more compact and lightweight systems without compromising performance. This exceptional power density ensures maximum efficiency and reduced energy losses.

4. Versatile and Easy to Implement: The V22TG D³GAN is designed to support various system configurations, including paralleling of devices, full-bridge, half-bridge topologies, and power factor correction (PFC) circuits. This flexibility allows for seamless integration into a wide array of power electronics applications.

Availability and Sample Shipment:

VisIC Technologies is pleased to announce that samples of the V22TG D³GAN will be available in the first quarter of 2024. This early availability allows manufacturers to assess and experience the performance and benefits of the package firsthand, aiding in the rapid development of the next generation of systems.

"We are thrilled to introduce the V22TG D³GAN power package, which represents a significant breakthrough in automotive power electronics," said Dr. Tamara Baksht, CEO and Co-Founder of VisIC Technologies Ltd. "This advanced power package not only offers exceptional performance and reliability but also provides the versatility and ease of implementation required for emerging automotive and industrial applications. We are confident that the V22TG D³GAN will empower manufacturers to accelerate the adoption of electric vehicles."

About VisIC Technologies Ltd:

VisIC Technologies is a world leader in GaN electronics for EV applications, focused on high-power automotive solutions. Its efficient and scalable products are based on deep technological knowledge of gallium-nitride and decades of experience. VisIC Technologies is committed to providing a step function improvement in size and cost of energy conversion systems and is dedicated to high-quality customer support at all development phases. VisIC offers high-power transistor products based upon compound semiconductor Gallium Nitride (GaN) material, aiming to provide products for cost-effective and high-performance automotive inverter systems.

Press contact

Ortal Zanzuri
CFO
VisIC Technologies Ltd.
zanzuri.ortal@visic-tech.com

Adoption of GaN & digital controller in new design helps engineers improve power density, conversion efficiency, dynamic response and reliability

TAIPEI, March 2, 2023 /PRNewswire/ -- Texas Instruments (TI) (NASDAQ: TXN), a leader in high-voltage semiconductor solutions, today announced that LITEONLITEON Technology has selected TI's highly integrated gallium nitride (GaN) field effect transistor (FET) plus C2000^TM real-time microcontrollers (MCUs) for its latest high-performance server power supply unit (PSU) for the North American market. Leveraging TI's LMG3522R030 GaN FET and a TMS320F28003x C2000 real-time MCU, the newly commercialized PSU offers power density of over 95 W/in³ and meets 80 Plus Titanium standards.

"Our collaboration with LITEON demonstrates how TI is helping designers answer the demands of high-voltage systems with end-to-end system know-how and a specialized portfolio of high-voltage semiconductors. By pairing the power of TI GaN products and C2000^TM real-time MCUs, designers can better meet the demands for smaller, more reliable systems," said Luke Lee, TI's vice president for Asia and president for Taiwan, Korea and South Asia.

LITEON Technology is a global leading provider of power management solutions, offering highly-efficient power supplies for data centers. "LITEON has been the leader in server power supplies and has faced the challenges of new technology with innovative solutions. High-performance servers increasingly demand more power in less space, where high power output, conversion efficiency, miniaturized components and heat dissipation are critical challenges. TI's GaN technology and C2000 real-time MCUs perfectly suit our solutions," said John Chang, LITEON's general manager of the Cloud Infrastructure System and Platform division.

Enabling efficient power supply design

Data centers, telecom equipment and many industrial applications are increasingly requiring larger power supplies, while also requiring reduced system size, weight, environmental impact and cost. This has challenged engineers to find new ways to reach higher power levels, in the same or smaller form factors, while also enhancing thermal performance. To address these power density challenges and requirements for future power supplies, LITEON leveraged TI GaN and C2000 real-time MCUs to achieve a flexible daughter-card design. The design also helps engineers shorten project design cycles by allowing them to scale the design to different power supply requirements.

LITEON design engineers collaborated with TI experts to accelerate the adoption of GaN technology in their PSU design, working together to optimize the power loop and daughter card layout. Additionally, LITEON leveraged TI's expertise in power FET and controller design to improve the reliability of the PSU through comprehensive system-level verification. The flexible high-resolution pulse-width-modulation (PWM) actuation from TI's C2000 real-time MCUs and GaN also helps engineers enable high switching frequency, advanced topologies, and switching schemes. To learn more about pairing TI GaN FETs and C2000 real-time MCUs, read the white paper "Achieve Power-Dense and Efficient Digital Power Systems."

To learn more about LITEON's newly released power supply design, see https://www.liteon.com/en-us.

For more information on TI's high-voltage technology, see https://www.ti.com/technologies/high-voltage.html.

About Texas Instruments

Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures, tests and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. Our passion to create a better world by making electronics more affordable through semiconductors is alive today, as each generation of innovation builds upon the last to make our technology smaller, more efficient, more reliable and more affordable – making it possible for semiconductors to go into electronics everywhere. We think of this as Engineering Progress. It's what we do and have been doing for decades. Learn more at TI.com.

MUNICH, Dec. 3, 2025 /PRNewswire/ -- The U.S. International Trade Commission (ITC) found the violation of one patent owned by Infineon Technologies AG (FSE: IFX) (OTCQX: IFNNY) concerning gallium nitride (GaN) technology by Innoscience.^[1] In addition, in this preliminary decision, the ITC confirmed that both patents asserted by Infineon in the proceedings before the ITC are legally valid.^[2] The case centers on the unauthorized use of Infineon's patented GaN technologies by Innoscience. The Commission's final determination is expected to be issued on April 2, 2026. If this preliminary decision will be confirmed, it will lead to an import ban of Innoscience's allegedly infringing products into the United States of America.

"This ruling is another testament to the strength of Infineon's intellectual property and confirms our commitment to vigorously defend our patent portfolio against infringements and ensuring fair competition in the market," says Dr. Johannes Schoiswohl, Senior Vice President and Head of Infineon's GaN Systems Business Line. "We remain dedicated to fostering innovation and advancing semiconductor technology to address the world's most pressing challenges, from decarbonization to digital transformation." 

The ruling is yet another positive decision which underscores the value of Infineon's contributions to GaN technology. In a parallel dispute in Germany, the German patent office recently confirmed the validity of a patent of Infineon and upheld it in slightly amended form. Infineon is asserting infringement of this patent in the Munich District Court.^[3] Already in August 2025, the Munich District Court I (Landgericht München I) found infringement of another Infineon patent by Innoscience.^[4]

Infineon is a leading integrated device manufacturer (IDM) in the GaN market with the industry's broadest IP portfolio, comprising approximately 450 GaN patent families. With higher power density, faster switching speeds, and lower power losses, GaN semiconductors enable smaller designs, reducing energy consumption and heat generation. As a leader in power systems, Infineon is mastering all three relevant materials: silicon (Si), silicon carbide (SiC) and gallium nitride.  

Press Contact:

Andre Tauber, andre.tauber@infineon.com,  Tel. +49 89 343 6705

^[1] US 9,899,481
^[2] US 9,899,481 and US 9,070,755
^[3] DE102017100947
^[4] DE102014113465

WASHINGTON, Dec. 6, 2024 /PRNewswire/ -- Etaker F2000 Alternator Charger: Redefining the Outdoor Power Experience

The pursuit of adventure is driving a surge in demand for outdoor power. Whether you are a weekend camper, a full-time overlander, or a truck driver navigating remote roads, "all-electric activities" are becoming the new standard. Currently, vehicle power applications mainly rely on portable power stations, backup battery systems, or specialized automotive power systems. However, these solutions come with various issues: portable power stations charge slowly and have limited charging sources; backup battery systems are complex to install and operate, with high risks; and specialized automotive power systems are costly and not suitable for smaller vehicles.

Etaker F2000: A New Solution for Outdoor Power

To address the core pain points of outdoor power, Etaker has launched the new Fleet series of vehicle fast charging devices, including the F2000 and F1000Pro. These products are built on the core principles of "blazing-fast charging, flexible expansion, and reliable safety," providing efficient and convenient outdoor power solutions. Whether for fast charging portable power stations, building a low-cost small-capacity power system for off-road vehicles, or powering large RVs and even boats, the Etaker Fleet vehicle fast charging series can meet your needs.

Blazing-Fast Charging: The F2000 supports 2000W fast charging, fully charging 2kWh in just one hour, completely eliminating the frustrations of slow charging and insufficient power.

Flexible Expansion: It can serve as a fast charger for portable power stations or be combined with a backup battery to create a low-cost professional automotive power system, that adapting to various outdoor scenarios.

Versatile Application: Whether you are a weekend camping enthusiast, a full-time hiker, or a truck driver, the F2000 provides reliable power support.

Unmatched Versatility and Control

The Etaker F2000 is built for true versatility:

• Multi-Scenario, Multi-Device Compatibility: Harness the power of both your vehicle's alternator and solar panels with a maximum input of 2000W per channel. Prioritize solar charging for an eco-friendly approach. Power various battery types (Lithium, Lead-acid, etc.) with adjustable charging voltage up to 60V+.
• Reverse Charging and Battery Maintenance: Charge your car battery for a jump-start and benefit from built-in battery maintenance features to extend battery lifespan.
• Direct DC Appliance Operation: Configure the solar input for 12/24/36/48V DC output, directly powering a wide range of DC appliances.
• Smart App Control: Manage device settings, operation modes, and monitor device status in real-time via the intuitive app.

Efficiency, Safety, and Durability Built In

The Etaker F2000 is engineered with advanced features for efficiency, safety, and durability:

• GaN Conversion Technology: Utilizing Gallium Nitride (GaN) technology, the F2000 achieves over 95% conversion efficiency, resulting in a smaller footprint, lower heat generation, and ensuring efficient operation.
• Six-Series Alloy Shell: A high-strength aluminum alloy casing delivers excellent impact resistance while ensuring efficient heat dissipation, ensuring device stability in harsh environments.

Redefining the Outdoor Power Experience

The Etaker F2000 is more than just a charger; it's a paradigm shift in outdoor power:

• Revolutionary Experience for Portable Power Users: The F2000 allows you to charge your portable power station while driving or even while using it, eliminating the need for constant charging and eliminating power anxiety.
• Low-Cost Construction of a Professional Automotive Power System: Simply add a battery pack and build your own customized automotive power system around the F2000, enjoying professional-level features and app control.
• Unlimited Possibilities for Outdoor Enthusiasts: The combined charging power of vehicle alternators and solar energy ensures a constant stream of power for any scenario, whether camping, exploring, or driving long distances.

The Etaker F2000 is a testament to innovation in the world of outdoor power. It empowers adventurers to embrace a more free and convenient outdoor life, providing the reliable energy they need to explore the world without limits.

CONTACT: Connie Liang, connie@etakerpower.com

• UOB is the first local bank and largest commercial investor in Singapore's first smart digital district.
• New products and capabilities will be ideated and developed in this new global design and developmental hub to drive the future of banking in ASEAN.

SINGAPORE, April 18, 2026 /PRNewswire/ -- UOB will invest more than S$500 million to build its new global technology and innovation centre in JTC's Punggol Digital District (PDD). With this investment, UOB becomes the first local bank to establish its presence in Singapore's first smart and sustainable business district, and is the largest commercial investor in PDD to date.

Targeted to be completed by the end of 2026, the 300,000 square feet centre will house around 3,000 talents engaging in technology, innovation and digital roles to further the Bank's digital ambitions. The new centre will offer high-performance workplaces to foster higher employee performance and engagement. It will also be fitted with green features, in line with the sustainability nature of the district.

Mr Wee Ee Cheong, Deputy Chairman and Chief Executive Officer, UOB, said, "UOB is pleased to be part of this smart nation initiative as the first Singapore bank and the largest commercial investor in the PDD. Our investment here reinforces our commitment to grow our Singapore core, and to support our customers in Singapore and across ASEAN on their digital journey. We look forward to working with the vibrant ecosystem of partners here to accelerate innovation, talent building and sustainability."

UOB is the only Singapore bank that has standardised its regional technology platform across ASEAN and its digital initiatives throughout the region have been raising the bar for digital banking, cross-border payments and financial advisory services. This new global design and developmental hub will further enhance the Bank's digital capabilities to drive and scale innovation to advance UOB to be the most preferred bank for both consumers and businesses in ASEAN. The Bank is also looking to further its commitment in nurturing the next generation of tech talent in PDD. Working closely with JTC, UOB will support local industrialists in PDD and beyond in embracing and jumpstarting their sustainability journey through capabilities building and financing programmes.

Building the future of banking at PDD

Leveraging capabilities and expertise of different partners within PDD, UOB strives to build the future of banking for ASEAN by redefining customer experience in financial services through innovations, testing and developing progressive and personalised solutions for customers.

UOB TMRW app is the Bank's all-in-one app built around the customer, with its multidimensional capabilities in payments, investments, lending and rewards. TMRW was designed and built out of the Bank's global tech centre in Singapore, and subsequently rolled out to UOB's key regional markets with adaptation to local nuances. As the Bank's core digital platform to digitally acquire, serve and engage customers at scale, UOB TMRW is powered by leading technologies such as data analytics, artificial intelligence and machine learning models, to provide personalised insights and product offering catered to every unique customer's needs. PDD will be the next innovation lab where new products and features will be ideated, developed, piloted and rolled out regionally.

To grow and to contribute to the digital ecosystem at PDD, UOB will also be housing its innovation accelerator, The FinLab, at PDD to foster closer collaborations with tech partners, start-ups and small- and medium-sized enterprises (SMEs). From accelerating early-stage fintechs to scale, to helping SMEs transform digitally and sustainably across the region, The FinLab has supported more than 20,000 businesses since its inception in 2015. The FinLab also launched the Sustainability Innovation Programme and The Greentech Accelerator in 2021 and 2022 respectively to drive green capabilities and connect SMEs with green solution providers.

Nurturing future generations of tech talent

UOB recognises the importance of nurturing its future generations of talent, and the value of continual upskilling and reskilling to keep current and future employees future ready. As one of the first, and handful, of local enterprises with a global tech centre based in Singapore, UOB's investment in PDD signifies its commitment to grow a world-class tech team locally.  UOB has in place a wide range of meaningfully-designed training programmes and collaborates with leading academic and industry partners to hone the digital skills of its workforce.

As part of expanding its people and development capabilities, UOB today signed a memorandum of understanding (MOU) with the Singapore Institute of Technology (SIT) to set up a Fintech Innovation Lab. Housed in SIT's upcoming Punggol campus, this joint lab will allow UOB's employees and SIT's academic staff and students to undertake fintech innovation, training, and development, and to participate in applied research and innovation to deliver integrated solutions that address real business challenges. The proximity of UOB and SIT's workplace and training locations and co-utilisation of facilities at PDD will provide greater synergy in talent development.

The latest MOU adds to UOB's existing support of SIT's Work-Study Degree programmes where SIT students from three degree programmes^[1] can access applied learning opportunities via work attachments at UOB, as well as work opportunities for its graduates.

To continue growing its own timber, UOB's existing employees will also benefit from training workshops and seminars conducted by SIT to upskill themselves with relevant digital and fintech skills to prepare themselves for a digital future.

Forging a sustainable future for the ecosystem

As part of UOB's efforts in forging a sustainable future, the Bank inked a MOU with JTC today to collaborate in the decarbonisation drive of Singapore businesses. This collaboration combines the strengths of JTC's and UOB's sustainability capabilities to scale the adoption of green solutions.

Based on UOB Business (SME and Large Enterprises) Outlook Study 2023, almost four in five SMEs believe in the importance of incorporating sustainable practices in their businesses. However, they face major barriers in implementation such as insufficient knowledge and lack of resources.

To address this, JTC and UOB will conduct joint outreach capacity-building workshops for local industrialists, within PDD and beyond, under this new partnership. The workshops will leverage both parties' respective technical expertise and toolkits, including UOB Sustainability Compass, to assess companies' sustainability readiness. Prioritised action plans and recommendations from the outreach, coupled with UOB's sustainable financing solutions, will support businesses as they advance their sustainability journey towards a net-zero economy. UOB and JTC's joint outreach will commence in the later half of 2023, focusing on local industrialists.

Being the largest commercial investor in PDD, UOB is also committed to contributing to the district's sustainable ecosystem. UOB has maintained operational carbon neutrality since 2021 and this new centre will incorporate green building features and technologies to drive energy efficiency. These features include:

• rooftop solar panels to tap renewable energy to partially meet the building's power needs;
• integrated building management and smart lift systems to optimise energy consumption;
• air-conditioning systems with an environmentally-friendly refrigerant of low global warming potential^[2] and airside-optimisation solutions to maintain energy optimisation of cooling systems; and
• air quality-monitoring and improvement solutions.

The Bank is also exploring to install alternative cooling solutions, such as chilled beams and a direct current distribution system, to further reduce energy consumption.

UOB's workplace transformation journey to support the future of work emphasises on employees' safety, security and well-being, core ethos to creating high-performance workplaces. The Bank focuses on users' ergonomic and comfort through use of certified sustainable material furniture and finishes. Workspaces are enhanced with smart and touchless technology features such as smart LED lighting system, facial recognition access and workspace booking systems to support an agile working environment for better employee experience and productivity while safeguarding their health and well-being.

About UOB

UOB is a leading bank in Asia. Operating through its head office in Singapore and banking subsidiaries in China, Indonesia, Malaysia, Thailand and Vietnam, UOB has a global network of around 500 offices in 19 countries and territories in Asia Pacific, Europe and North America. Since its incorporation in 1935, UOB has grown organically and through a series of strategic acquisitions. Today, UOB is rated among the world's top banks: Aa1 by Moody's Investors Service and AA- by both S&P Global Ratings and Fitch Ratings.

For nearly nine decades, UOB has adopted a customer-centric approach to create long-term value by staying relevant through its enterprising spirit and doing right by its customers. UOB is focused on building the future of ASEAN – for the people and businesses within, and connecting with, ASEAN.

The Bank connects businesses to opportunities in the region with its unparalleled regional footprint and leverages data and insights to innovate and create personalised banking experiences and solutions catering to each customer's unique needs and evolving preferences. UOB is also committed to help businesses forge a sustainable future, by fostering social inclusiveness, creating positive environmental impact and pursuing economic progress. UOB believes in being a responsible financial services provider and is steadfast in its support of art, social development of children and education, doing right by its communities and stakeholders.

WASHINGTON, June 8, 2024 /PRNewswire/ -- "Overlanders, car campers, van lifers and RV lovers all dreamed about converting to fully electric systems and stopping the use of propane. However, the cost and complexity of setting up conventional electric systems remain out of reach for most enthusiasts, ETAKER changed the game with simple, compact and portable power solutions that let anyone enjoy a much safer and more convenient electric camping experience. From weekend warriors to full-time overlanders, you'll find a solution that fits your needs."

Compact Powerhouse: The M2000

Space is a premium in RVs and SUVs, making the M2000's compact design a game changer. It is 50% smaller and 30% lighter than competitors' 4kW power stations, without compromising on power. Equipped with a Semi-solid state battery, GaN inverter, and an integrated alloy design, the M2000 ensures you have reliable power wherever your adventures take you. Beyond vehicle use, it seamlessly transitions to settings like campsites and backyards, offering a versatile solution that reduces the need for multiple devices.

Revolutionizing On-the-Go Power: Fleet 1000 Kits

Say goodbye to slow AC charging, unreliable solar power, and the trickle charge from a cigarette lighter. The ETAKER Fleet 1000 smart alternator charger transforms on-the-go power solutions. Connecting directly to your car battery and rooftop solar modules, it turbo-charges the M2000 Power station. Generate 1 kWh in just one hour of driving and fully charge the 2kWh capacity in a little over two hours. Embrace fast, efficient charging and eliminate downtime.

The M2000's AC-LINK Tech delivers high performance, ramping up to 4kWh and 4kW, making it compatible with 99% of electrical equipment. Whether keeping refrigerators cool or running pressure control systems, the M2000 handles high-capacity and high-power demands effortlessly, all while remaining portable and easy to use.

Experience All-Electric Camping with ETAKER

ETAKER upgrades your off-grid excursions to All-Electric Camping, providing peace of mind on your travels. Advanced materials and technology, such as the GaN inverter, reduce heat generation and, combined with its alloy case, cut noise by 60%. Operating at under 1kW, the power station is virtually silent. The built-in low-temperature preheat technology ensures operation in temperatures as low as -30°C. The semi-solid state battery, comprising 92% solid electrolytes, offers superior safety over traditional lithium batteries, and the one-piece molded six-series alloy casing provides robust physical protection.

With ETAKER, elevate your adventures beyond expectations. We redefine the camping experience to be as free and adventurous as the spirits who embark on them.

Media Contact: ETakertech@gmail.com

HyperStrong (SHSE:688411) was issued at RMB 19.38 per share and closed at RMB 63.80, representing an increase of 229.21% from the issue price, with a market capitalization of RMB 11.339 billion.

Qiming Venture Partners has been an early investor in HyperStrong since 2015 and has continued to support the company's growth through subsequent funding rounds. HyperStrong's successful IPO marks Qiming's first IPO milestone of 2025.

Founded in 2011, HyperStrong has established itself as a trusted partner in the global transition to renewable energy. The company provides a wide range of energy storage solutions including liquid-cooling energy storage systems, outdoor cabinets, all-in-one charging and storage systems for utility-scale, commercial and industrial uses.

With the increasing global demand for renewable energy, utility-scale energy storage systems have become essential for ensuring grid stability and safety. HyperStrong has positioned itself as a top-tier BESS provider, leveraging its strengths in battery digital modeling, energy and thermal management, big data platform, system integration, and rigorous testing capabilities. These technologies enable HyperStrong to meet the diverse and evolving needs of its customers.

According to S&P Global Commodity Insights, HyperStrong ranked among the top three BESS integrators in terms of global capacity installed in 2023.

Dr. Jianhui Zhang, Chairman and CEO of HyperStrong, expressed his vision for the company: "HyperStrong remains committed to unlocking the full lifecycle value of energy storage systems. We aim to deepen our presence across the energy storage value chain, enhance our integration capabilities, and foster a collaborative innovation ecosystem. By advancing digital applications, hardware-software synergies, and comprehensive solutions, we will drive rapid product innovation to meet the ever-changing needs of the global market."

Alex Zhou, Managing Partner of Qiming Venture Partners, said, "Over the past decade, we have supported HyperStrong as an investor, shareholder, and board member, steadfastly accompanying the company throughout its remarkable growth. We have witnessed HyperStrong leverage its cutting-edge R&D, strategic market insights, and relentless spirit of innovation to become a leader in the competitive energy storage industry. Today's successful IPO is not only a major milestone in its journey but also the start of an exciting new chapter full of potential. As the global energy sector undergoes a transformative shift, energy storage has become a critical pillar of this change. We expect HyperStrong to continue leading the way in technological innovation, solidifying its position as a key player in the global energy storage market."

About Qiming Venture Partners

Qiming Venture Partners was founded in 2006. Currently, Qiming Venture Partners manages eleven US Dollar funds and seven RMB funds with $9.5 billion in capital raised. Since our establishment, we have invested in outstanding companies in the Technology and Consumer (T&C) and Healthcare industries at the early and growth stages.

Since our debut, we have backed over 580 fast-growing and innovative companies. Over 210 of our portfolio companies have achieved exits through IPOs at the NYSE, NASDAQ, HKEX, Shanghai Stock Exchange, or Shenzhen Stock Exchange, or through M&A or other means. There are also over 80 portfolio companies that have achieved unicorn or super unicorn status.

Many of our portfolio companies are today's most influential firms in their respective sectors, including Xiaomi, Meituan, Bilibili, Zhihu, Roborock, UBTech, WeRide, Gan & Lee Pharmaceuticals, Tigermed, Zai Lab, CanSino Biologics, Schrödinger, APT Medical, New Horizon Health, Sanyou Medical, AmoyDx, Berry Genomics, SinocellTech, Yuanxin Technology, Caidya, Belief BioMed, among many others.

Held from June 11–13, 2024, at the Marina Bay Sands Convention Centre, Singapore, NRF 2024 APAC gathered thousands of industry leaders and innovators to explore the latest solutions shaping the future of retail. Zoku was selected to showcase its innovative Unified Commerce Platform at the Innovation Lab. During the three-day event, Zoku's team had the opportunity to meet with many business leaders and demonstrate the platform that includes integrated ERP, CRM, Omnichannel POS, eCommerce, Warehouse, and Inventory Management Modules, all unified with Zoku Sync, a robust cloud integration platform ensuring smooth interoperability.

The Zoku booth was one of the few booths visited by the Deputy Prime Minister of Singapore, Mr. Gan Kim Yong, along with a delegation that included the President and CEO of the NRF, Mr. Matthew Shay. It was a proud moment for the Zoku team to showcase its advancements in retail technology to such distinguished guests.

Key Features Demonstrated:

Zoku's In-Store Modules: Consisting of the Zoku omnichannel POS and inventory management app, in-store modules were in the spotlight during the demonstrations. The vast majority of retailers that had the chance to meet with the Zoku team during the event indicated that their current POS system lacks the omnichannel and scalability capabilities offered by Zoku. The visitors had the chance to see live how managing inventory, sales, and customer data across all physical and e-commerce stores is made easy, essentially from any device connected to the internet. The solution is scalable as store locations and users can be added, removed, or changed easily and with the highest level of security.

Unified Back-to-Front Commerce: Zoku's platform addresses the challenge faced by nearly 50% of brands, as presented in a recent KPMG study, by unifying online and in-store operations and data as well as back-office functions including accounting, procurement, inventory, and customer management. The Zoku platform empowers retailers to offer seamless shopping experiences to their customers in-store and online with full, centralized visibility of all operations in real-time. The real-time availability of all data at the enterprise level, including detailed reports on sales, customer behavior, and store performance as well as dashboards of key metrics, enables quick decision-making.

Advanced Analytics and AI: Zoku's platform leverages advanced analytics and AI capabilities to provide detailed customer insights and comprehensive performance metrics. These tools help businesses understand customer behavior and preferences, track sales performance, and optimize inventory management.

Zoku Technology: "The shift to unified commerce enables retailers to connect customer-facing sales channels, critical data, and management systems through scalable infrastructure. This integration breaks down silos across IT systems, providing visibility into customer data, e-commerce, order fulfillment, inventory management, accounting, procurement, CRM, and POS systems. All this is made possible by Zoku Sync, a cloud-based commerce integration engine. Unlike many legacy solutions in the market that are cloud-hosted, Zoku is a cloud-native solution as it was born on the cloud," said Jelmer Cormont, CTO of Zoku.

"The platform addresses the critical needs of multi-location operators by streamlining operations, enhancing both customer and associate experiences, and driving growth. Unifying online and in-store operations with an advanced POS designed to enhance omnichannel capabilities and integration with the leading eCommerce platforms, efficient warehousing and inventory management tools, and comprehensive sales channel management functions," said George Makriyiannis, CEO of Zoku.

About Zoku

Zoku is a leading provider of cloud-based unified commerce solutions, dedicated to helping businesses streamline their operations, enhance customer satisfaction, and drive growth. Our innovative platform integrates key business functions to provide a seamless and efficient experience for retailers, food and beverage operators, and wholesale distributors.

With offices in Singapore and the USA, and a global network of partners, Zoku has been enabling retail, food & beverage, and wholesale distribution operators worldwide to streamline operations, elevate customer experiences, and grow profitable revenue.

For more information about Zoku and our Unified Commerce Platform, visit www.zokusuite.com.

LAS VEGAS, Sept. 8, 2025 /PRNewswire/ -- EcoFlow, a leading eco-friendly energy solutions company, will showcase its newly launched OCEAN Pro residential energy storage system at RE+ 2025, the largest clean energy event in North America.

EcoFlow OCEAN Pro is a fully integrated whole-home energy solution designed to deliver homeowners more control over their energy while easing setup for installers. It offers 24 kW output, multi-source backup support, AI-driven energy optimization and multi-layer protection system. These features combine to deliver reliable whole-home power, maximum bill savings, and industry-leading safety and reliability.

OCEAN Pro is built to handle large homes and is the perfect answer to high electricity costs, extreme weather events and power outages. Homeowners can now tackle rising energy challenges and fully leverage their rooftop solar investments. Advanced technology, unmatched capabilities and sleek design makes it a standout in the home energy space. 

SGS's World First UL9540B Certification for Fire Safety

SGS, the world's leading Testing, Inspection and Certification company, will award EcoFlow OCEAN Pro its first UL9540B certificate. To be presented at RE+, the certificate is widely regarded as one of the most rigorous standards in the residential solar storage industry, particularly when it comes to protection during wildfires and overheat safety. This achievement establishes a new global benchmark for home energy storage safety and demonstrates EcoFlow's leadership in advancing industry standards.

"We recently adopted UL 9540B with insights from firefighters around the world in order to enhance fire safety of residential battery systems," said John Ciliege, Vice President of SGS Connectivity Services and Global Head of Nationally Recognized Testing Laboratory (NRTL). "We found EcoFlow OCEAN Pro to not only meet but exceeded standards after rigorous testing at our new lab in Auburn Hills, Mich. We applaud EcoFlow's commitment to delivering safe solutions for homeowners worldwide."

EcoFlow managed this industry-first all while delivering a system with unmatched power, capable of running two 5-ton central air conditioners simultaneously. It also operates across extreme temperatures beyond its competitors (-4 to 140°F) and offers long-term reliability with the industry's longest 15-year warranty.

Collaboration with Texas Instruments for Superior Performance

EcoFlow OCEAN Pro harnesses cutting-edge technologies from Texas Instruments (TI) to deliver exceptional performance, efficiency and safety. Through the integration of TI's C2000™ real-time microcontrollers, OCEAN Pro achieves precise power conversion control with advanced peripherals, real-time diagnostics and comprehensive safety features, making it capable of handling diverse power requirements and complex operations.

The system's capabilities are further enhanced by TI's BQ79616 scalable daisy-chain battery monitor, which delivers industry-leading voltage measurement accuracy across all battery cells. This ensures real-time protection against critical conditions including overcharging, deep discharging and overheating. With its integrated cell-balancing functionality, the system significantly extends battery lifespan while maintaining consistent and reliable performance across varying conditions.

"Our ongoing collaboration with EcoFlow represents TI's commitment to advancing sustainable power solutions," said Henrik Mannesson, general manager, Energy Infrastructure at Texas Instruments. "By integrating our analog and embedded technologies—from GaN power stages to battery management systems to C2000™ real-time microcontrollers, TI and EcoFlow are enabling efficient, reliable and safe power solutions. Our technology, system expertise and manufacturing leadership, are helping extend access to affordable, sustainable power for everyday consumers."

Streamlined for Installers

EcoFlow's engineers know system performance is only part of the equation for professional installers. OCEAN Pro is designed for an easier installation process in order to cut on-site time and improve installation efficiency and profitability.

Its 3-in-1 Smart Electrical Panel integrates panel, gateway and ATS into a single unit, reducing a typical two-day installation to one. Installers can reduce complexity, complete more projects and deliver higher-value systems with three-minute commissioning and one-click system configuration.

The system is backed by a 15-year warranty, 24/7 monitoring and rapid-response service, including VIP installer support with a 30-second response time and 48-hour parts replacement guarantee. These tools give installers confidence and ensure long-term reliability for customers.

U.S. Market Expansion

EcoFlow's expansion into U.S. residential energy storage with OCEAN Pro comes after already delivering solutions to more than 17,000 European households. It is ideal for the country's larger homes with demanding power needs as well as its extreme weather and more frequent blackouts. Where conventional storage systems often fall short, OCEAN Pro offers U.S. installers the right tool for the job.

Visit EcoFlow at RE+ 2025, Booth V11457, to see the OCEAN Pro and learn more about the company's installer partner network.

About EcoFlow:

EcoFlow is a leading provider of eco-friendly energy solutions, committed to powering a new world. Since its founding in 2017, EcoFlow has aimed to be the FIRST in power solutions — Flexible, Innovative, Reliable, Simple, and Thorough — for individuals and families, whether at home, outdoors or on the go. With a smart manufacturing center in China, and headquarters in the USA, Germany and Japan, EcoFlow has empowered over 5 million users in 140 markets worldwide. For more information, visit https://www.ecoflow.com/us.

Showcasing the Future of AI with Industry Leader

TAIPEI, May 16, 2025 /PRNewswire/ -- Mouser Electronics, Inc., the industry's leading New Product Introduction (NPI) distributor with the widest selection of semiconductors and electronic components™, announces its debut at COMPUTEX 2025. The event will take place from May 20th to 23th, at the Taipei Nangang Exhibition Center, Hall 1, Booth #I0102. Mouser will be exhibiting alongside industry-leading partners NexCOBOT, Renesas Electronics, and TAIYO YUDEN, spotlighting the transformative power of AI and the latest trends shaping the industry.

"As digital transformation accelerates, AI is revolutionizing industries like never before," said Daphne Tien, Vice President of Marketing and Business Development at Mouser APAC. "COMPUTEX is a leading global platform for AIoT and breakthrough technologies, and this year's 'AI Next' theme highlights the latest AI innovations and trends. We're thrilled to exhibit in Taiwan for the first time and invite everyone to visit our booth to see how AI is shaping the future."

NexCOBOT's AI-driven robotic systems
At COMPUTEX 2025, Mouser will feature the latest in semiconductor innovations and AI-powered solutions designed to spark creativity and accelerate development for engineers. Attendees will have the opportunity to see NexCOBOT's AI-driven robotic systems, including its Functional Safety Controller, GRC Robot Controller, and Robotic Actuator. These modular solutions are designed for industrial use, offering certifiable safety functions like position and speed monitoring, and are built to comply with international safety standards such as ISO 10218 — helping engineers build smarter and safer robots with ease.

Renesas Electronics power and sensing solutions
Visitors to Mouser's stand can explore Renesas' cutting-edge power and sensing solutions, including high-efficiency GaN technology for over 1kW power conversion, USB PD fast charging designs (240W and 65W), and edge AI sensor systems powered by Reality AI Tools. These technologies enable faster, smarter, and more energy-efficient devices for both industrial and consumer applications.

TAIYO YUDEN Small High-End MLCC products
Attendees at Mouser stand can see TAIYO YUDEN's Small High-End MLCC products, ideally suited for AI servers and laptops. Engineered to support high capacitance and reliable performance up to 125℃, these components meet the growing demands of compact, high-performance computing systems.

Mouser's booth will also feature hands-on interactive demos to make AI technology more fun and approachable. Don't miss the spin-to-win activity for a chance to win premium gadgets and engineering tools!

To learn more about Mouser's presence at COMPUTEX 2025, please visit: https://www.mouser.tw/computex/.
For more Mouser news and our latest new product introductions, visit https://www.mouser.com/newsroom/.

As a global authorized distributor, Mouser offers the widest selection of the newest semiconductors, electronic components and industrial automation products. Mouser's customers can expect 100% certified, genuine products that are fully traceable from each of its manufacturer partners. To help speed customers' designs, Mouser's website hosts an extensive library of technical resources, including a Technical Resource Center, along with product data sheets, supplier-specific reference designs, application notes, technical design information, engineering tools and other helpful information.

Engineers can stay abreast of today's exciting product, technology and application news through Mouser's complimentary e-newsletter. Mouser's email news and reference subscriptions are customizable to the unique and changing project needs of customers and subscribers. No other distributor gives engineers this much customization and control over the information they receive. Learn about emerging technologies, product trends and more by signing up today at https://sub.info.mouser.com/subscriber/.

About Mouser Electronics
Mouser Electronics is an authorized semiconductor and electronic component distributor focused on New Product Introductions from its leading manufacturer partners. Serving the global electronic design engineer and buyer community, the global distributor's website, mouser.com, is available in multiple languages and currencies and features more than 6.8 million products from over 1,200 manufacturer brands. Mouser offers 28 support locations worldwide to provide best-in-class customer service in local language, currency and time zone. The distributor ships to over 650,000 customers in 223 countries/territories from its 1 million-square-foot, state-of-the-art distribution facilities in the Dallas, Texas, metro area. For more information, visit https://www.mouser.com/.

Trademarks
Mouser and Mouser Electronics are registered trademarks of Mouser Electronics, Inc. All other products, logos, and company names mentioned herein may be trademarks of their respective owners.

Learn About the Latest Products and Upgrades that Accelerate Intelligent Solutions in Ion Implant

BEVERLY, Mass., Feb. 10, 2025 /PRNewswire/ -- Axcelis Technologies, Inc. (Nasdaq: ACLS), a leading supplier of enabling ion implantation solutions for the semiconductor industry, announced today that it will showcase its innovative Purion™ platform of ion implanters at SEMICON Korea 2025. The event is being held February 19th through February 21st, at the COEX Center in Seoul, Korea. SEMICON Korea will highlight key trends shaping the future, including AI, advanced packaging, and sustainable semiconductor manufacturing technologies.

Axcelis will be located at Booth #D622. Semiconductor manufacturers are invited to visit the Axcelis exhibit to learn first-hand about the latest products and upgrades that accelerate intelligent solutions in ion implant and deliver significant technology and manufacturing advantages. This includes:

• The Purion™ Platform - Axcelis' flagship implant platform, offering the most advanced ion implantation technology available today. Our family of application specific systems addresses high current, medium current, medium energy and high energy implant requirements for all existing and emerging applications.
• The Purion Power Series™ - The industry leading implant portfolio for power devices, featuring innovative solutions to excel at these applications due to its innovative platform that offers the flexibility to handle multiple wafer sizes (150mm, 200mm and 300mm), various substrate types (including SiC, Si, GaN and GaAs wafers) and at various implant temperatures (room temperature, warm and hot).
• Innovative New Upgrade Offerings - Our Customer Solutions and Innovation organization has an expanding array of enhancements that deliver a variety of performance and efficiency benefits. Numerous new upgrades will be on display including innovative source technology, productivity packages to increase throughput and productivity, and product Life Cycle packages to optimize performance at every stage of equipment lifecycle.

President and CEO of Axcelis Technologies, Russell Low, said, "We're excited to participate in SEMICON Korea, one of the leading semiconductor technology forums in the world. Korea is a very important market for Axcelis, and we are committed to providing the most advanced ion implant technology and support solutions to our customers. We are pleased to expand our operations in Korea with our recently opened Asia HUB Warehouse, which along with our Axcelis Asia Operations Center provides our customers with state-of-the-art manufacturing, engineering, services and logistics capabilities in the Asia Pacific region."

About Axcelis:
Axcelis (Nasdaq: ACLS), headquartered in Beverly, Mass., has been providing innovative, high-productivity solutions for the semiconductor industry for over 45 years. Axcelis is dedicated to developing enabling process applications through the design, manufacture and complete life cycle support of ion implantation systems, one of the most critical and enabling steps in the IC manufacturing process. Learn more about Axcelis at www.axcelis.com.

CONTACTS:
Press/Media Relations Contact: 
Maureen Hart
Senior Director, Corporate & Marketing Communications
Telephone: (978) 787-4266
Email: Maureen.Hart@axcelis.com

Axcelis Investor Relations Contact:
David Ryzhik
Senior Vice President, Investor Relations and Corporate Strategy
Telephone: (978) 787-2352
Email: David.Ryzhik@axcelis.com

Logo - https://mma.prnasia.com/media2/1756239/Axcelis_1_Logo.jpg?p=medium600 

The CoE, located at Cyient's Manikonda Campus, will focus on developing next-generation magnetic sensors and power semiconductor products for the automotive industry. The state-of-the-art facility was inaugurated by Allegro MicroSystems President & CEO Vineet Nargolwala in the presence of Max Glover, Senior Vice President WW Sales, Allegro MicroSystems, and Suman Narayan, Senior Vice President, Products, Allegro MicroSystems.    

The CoE will house over 100 skilled engineers specializing in key areas such as post-silicon validation, design verification, analog design, analog mixed-signal verification, and embedded systems. This expansion significantly strengthens Allegro MicroSystems's presence in India, providing access to a highly skilled talent pool and fostering collaboration within the vibrant Indian technology ecosystem.

The CoE will play a crucial role in accelerating the development of Allegro MicroSystems's sensor and power integrated circuit (IC) product portfolios, which are essential components in electric vehicles, advanced driver-assistance systems (ADAS) and other automotive applications. By leveraging Cyient's expertise in India, Allegro MicroSystems aims to bring innovative products to market faster and more efficiently. The collaboration will also focus on addressing key industry trends, including the increasing demand for magnetic sensors in electric vehicles, the rise of high-power devices such as SiC and GaN and the growing importance of embedded systems and platforms.

"India's rapidly growing automotive market presents a tremendous opportunity for Allegro MicroSystems," said Vineet Nargolwala, CEO of Allegro MicroSystems. "This CoE established with Cyient's partnership, will enable us to accelerate innovation in magnetic sensors and power semiconductors, delivering cutting-edge solutions that address the evolving needs of the automotive industry. This investment reinforces Allegro MicroSystems's commitment to driving e-mobility, clean energy and automation forward, aligning perfectly with our vision for a safer, more sustainable and autonomous future."

"Our relationship with Allegro MicroSystems has flourished over the past two years and we are incredibly proud of the team and the contributions they have made to Allegro MicroSystems's product portfolio. Semiconductors are at the heart of innovation across industries and this CoE strengthens Cyient's position as a leading partner for companies seeking to develop and manufacture cutting-edge semiconductor products," said Krishna Bodanapu, Executive Vice-Chairman & Managing Director, Cyient.

This collaboration marks a significant milestone for both companies, reinforcing their commitment to driving innovation in the automotive semiconductor market. The CoE will not only contribute to the growth of the semiconductor industry in India but also support the global automotive industry's transition towards a more sustainable and technologically advanced future.

About Allegro MicroSystems
Allegro MicroSystems, Inc. is leveraging more than three decades of expertise in magnetic sensing and power ICs, to propel automotive, clean energy and industrial automation forward with solutions that enhance efficiency, performance and sustainability. Allegro MicroSystems's commitment to quality drives transformation across industries, reinforcing our status as a pioneer in "automotive grade" technology and a partner in our customers' success. For additional information, please visit https://www.allegromicro.com/en/. 

About Cyient
Cyient (Estd: 1991, NSE: CYIENT) delivers Intelligent Engineering solutions for creating a digital, autonomous and sustainable future for over 300 customers, including 30% of the top 100 global innovators. As a company, Cyient is committed to designing a culturally inclusive, socially responsible and environmentally sustainable tomorrow together with our stakeholders. For more information, please visit www.cyient.com.

Cyient Contact:

Gowtham Uyalla
Kaizzen PR
gowtham.uyalla@kaizzencomm.com

Phalguna Hari Jandhyala
Cyient
phalguna.harijandhyala@cyient.com

Allegro MicroSystems Contact:  

Tyler Weiland 
Corporate Communications 
(972) 571-7834
tweiland.cw@allegromicro.com  

The event featured a keynote address by YBhg. Dato' Hairil Yahri Yaacob, Secretary General of the Ministry of Investment, Trade and Industry (MITI) of Malaysia, who highlighted the importance of agile regulatory systems to create a sustainable and inclusive economy in alignment with NIMP 2030. He emphasised MITI's commitment to a resilient economic future by integrating advanced technologies and ensuring that regulatory systems evolve in tandem with industrial innovation.

The RegTalk 2024 focused on identifying potential gaps in Malaysia's current regulatory framework that could impact economic growth and innovation, urging collaboration between regulators and industry stakeholders. Key discussions centred on how regulatory reforms and sandbox environments can support the NIMP 2030 ecosystem, laying the groundwork for an agile, efficient, and future-ready framework that fosters economic acceleration and strengthens partnerships across industries.

"We hope that the insights shared at this RegTalk 2024 session will lay the foundation for a resilient regulatory framework - one that not only accelerates economic growth but also drives innovation and fosters strong partnerships among key players in Malaysia's evolving economy. By working together, we can build an ecosystem that is adaptive, forward-thinking, and poised to meet the demands of tomorrow." said Futurise CEO, Rosihan Zain Baharudin.

Key Highlights of RegTalk 2024:

The session titled "Is Malaysia Prepared for Quantum Technologies," presented by Frost & Sullivan, moderated by Futurise, delved into Malaysia's readiness to adopt and regulate quantum technologies. This presentation highlighted both the promising opportunities and regulatory challenges associated with quantum advancements, offering insights into how Malaysia can position itself at the forefront of this transformative field.

In Panel Session 1: "The Role of Regulatory Sandbox in Enabling the NIMP Ecosystem," moderator Ari Zulkarnain of Zaid Ibrahim & Co led a discussion with speakers from Jentayu Sustainables Berhad, Zaid Ibrahim & Co, Futurise, and Boston Consulting Group. The panellists explored how regulatory sandboxes provide a secure environment for testing new and emerging technologies, paving the way for Malaysia to achieve its New Industrial Master Plan (NIMP) objectives.

Panel Session 2: "Making AI Work for You: Are Malaysian Industries and Regulators Equipped for the Future?" was led by Hilmy Yazid from Zaid Ibrahim & Co and featured perspectives from Cisco Systems Malaysia, Zaid Ibrahim & Co, Abdullah Chan and Universiti Malaya. This panel focused on the regulatory and operational challenges of AI adoption, addressing the crucial steps Malaysian industries and regulators must take to remain competitive and prepared for the future of artificial intelligence.

Futurise CEO, Rosihan Zain Baharudin, remarked, "Regulatory agility is key to fostering an environment that enables innovation while protecting public interests. RegTalk 2024 is a testament of our dedication to bridging the gap between technology and regulatory frameworks, supporting Malaysia's NIMP 2030 aspirations."

"The NIMP 2030 is driving measurable progress, with a 4.7 percent increase in GDP contribution, amounting to RM4.2 billion, alongside the addition of 200,000 jobs over the past year. Events like RegTalk are essential platforms for sharing these achievements and aligning on strategies to further empower SMEs, nurture homegrown talent, and prepare for Malaysia's ASEAN Chairmanship in 2025, strengthening our regional impact," said YBhg. Dato' Hairil Yahri Yaacob, Secretary General of MITI.

At the closing session, Zaid Ibrahim & Co, Managing Partner Gilbert Gan said "An agile regulatory approach empowers industries to innovate, experiment, and respond swiftly to market changes", thus providing insights into the day's discussions and underscoring Futurise's impact in shaping Malaysia's regulatory landscape.

For more information, please visit www.futurise.com.my.

About Futurise
Futurise is a wholly-owned subsidiary of Cyberview Sdn Bhd under the Ministry of Finance. It is mandated by the Government of Malaysia to manage the National Regulatory Sandbox, providing public policy advisory and acting as a key enabler of regulatory solutions to expedite innovation and future-proof Malaysia's economy.

About Zaid Ibrahim & Co
Zaid Ibrahim & Co (in association with KPMG Law) is a full-service and leading law firm in Malaysia. It is part of a global network and has a reputation for innovative and practical solutions customised to their clients' needs.

The firm's track record features engagements by local and multinational banks and corporations in complex corporate transactions, policy advisory, debt and equity capital markets transactions, technology, infrastructure projects as well as law reform initiatives.

Follow Futurise social media for updates:
FB: https://www.facebook.com/futurisemy/
Instagram: https://www.instagram.com/futurisemy
Linkedin: https://www.linkedin.com/company/futurise/
Twitter: https://twitter.com/FuturiseMY

https://www.linkedin.com/company/schneider-electric

https://www.facebook.com/SchneiderElectric?brandloc=DISABLE

https://www.instagram.com/schneiderelectric/

The issuer is solely responsible for the content of this announcement.

About Schneider Electric

Schneider's purpose is to empower all to make the most of our energy and resources, bridging progress and sustainability for all. We call this Life Is On.

Our mission is to be your digital partner for Sustainability and Efficiency.

We drive digital transformation by integrating world-leading process and energy technologies, end-point to cloud connecting products, controls, software and services, across the entire lifecycle, enabling integrated company management, for homes, buildings, data centers, infrastructure and industries.

We are the most local of global companies. We are advocates of open standards and partnership ecosystems that are passionate about our shared Meaningful Purpose, Inclusive and Empowered values.

www.se.com/hk